Plantronics Voyager 5200 Troubleshooting Guide

For other helpful guides visit the Plantronics Voyager 5200 resource center

Callers can't hear me / I can't hear callers

• Make sure your Voyager 5200 headset is paired to your mobile phone
• Reposition the headset on your ear as the sensors may not work
• Download the Plantronics Hub and disable Wideband Audio

My headset doesn't give me 7 hours of talk time

• Make sure your headset is paired to your phone
• Disable Wideband Audio in the Plantronics Hub
• Let your headset completely run out of battery then give it a full charge
• Some phones have less efficient Bluetooth and will not give 7 hours of talk time on a single charge

Pairing your Voyager 5200

1. With the Voyager 5200 headset power on press and hold the call button until you hear "pairing"

2. While the headset LED lights start flashing blue and red, activate the Bluetooth on your mobile phone and search for new devices

3. Select PLT V5200

4. Once paired the LED lights will stop flashing and you'll hear "pairing successful"

Reset Sensors

1. Wearing the Voyager 5200, tap the call button to test sensors. A talk time voice alert means sensors are working. A tone means the sensors need to be reset.

2. To reset the sensors, power on the headset, connect the headset to your computer's USB port for more than 10 seconds.

3. You can disable your headset smart sensors through the Plantronics Hub software under the Settings 

Is your Voyager 5200 no longer working after the troubleshooting steps above?

Consider doing one of two things.

1. Request a replacement from the manufacture if the headsets within th 1 year warranty.
2. If out of the 1 year warranty, you'll want to order a new Voyager 5200 here or another two different models to consider is the AfterShokz Opencomm and BlueParrott M300-XT