Blog

Step 1 Press your finger firmly on your Discover D904 battery until it begins to slide out. Step 2 Remove your Discover D904 battery ...

Step 1 Plug in the AC power adapter to the wall, then plug the other end into the bottom of your D904 charging base. Let your headset charge until...

Step 1 Plug in the AC power adapter and let your headset charge until the 4 LED lights on the face of the charging base are fully illuminated. St...

With the various different Plantronics wireless office headsets, at some point there will come a time (about 2 years) where your battery needs to b...

Step 1 Plug one end of your Plantronics APP-5 Hook Switch cable into the bottom back of your CS55 charging base. Step 2 Plug the other end of you...

Step 1 Connect one end of the Plantronics APC-4 Hook Switch cable into the bottom of your CS55 charging base.  Step 2 Plug the other two cords of...

Step 1 Plug in the AC power and let your CS55 headset charge for about 3 hours for a full charge. *After setup if you get a triple beep tone, foll...

There is multiple different ways to set up your Plantronics CS55 wireless headset depending on which desk phone you have, or what accessory was or...

Before getting started There is many different ways to set up your Plantronics CS540 wireless headset depending on which desk phone you have, or wh...

Follow this quick setup guide for your Discover Adapt 30 wireless headset with desk phones that have a headset port (Cisco, Avaya, Shoretel, Mitel...

Step 1 Connect your Plantronics APC-41, APC-42 or APC-43 to the back of your Plantronics CS540 (C054) charging base. Step 2 On the other end of ...

Step 1 Connect the Plantronics APC-41, APc-42 or APC-43 Hook Switch into the back of your Plantronics CS540 (C054) charging base. Step 2 Connect...