In this article we're going to show you how to pair your Savi 7220 headset to the charging base.
The Savi 7200 Office is a DECT wireless headset that get's paired to the charging base. This headset does not connect to your Bluetooth enabled devices.
Out of the box the headset comes pre-paired to the charging base as a standard. In the case it's not pairing to the base, follow the next steps below.
Savi 7200 Office Pairing Video
Step 1
Remove the AC power from the charging base and let it sit for about 5-10 seconds.
Step 2
Reconnect the AC power and wait until the LED turns solid on the charging base. Take the headset out of the base and turn it on and you should see the green LED for the desk phone illuminate.
Step 3 (if step 1 or 2 didn't work)
- Press and hold the volume up button on your headset until you see the green LED appear on your headset, then release.
- Located in the back of the charging base is a link button. Press and hold that for about 3 seconds on your Savi 7200 Office base until you see the desk phone symbol flash, then release.
- Once the desk phone icon turns solid, now press the on button on your headset to see if the desk phone symbol turns green.
If so, your headset is now paired to the charging base and ready to be used.
Need further support?
If this didn't work, feel free to contact us for further help.