Discover DHL110 Handset Lifter Setup Guide (Video) | Headset Advisor

Step 1

Install your Discover DHL110 Handset Lifter into the back of your Adapt 30 or D904 Wireless Headset charging base. Discover DHL110 Discover DHL110

Step 2

Remove the double sided tape. Discover DHL110

Step 3

Place the DHL110 Handset Lifter on the speaker of your desk phone underneath the handset and lightly stick the Lifter to your phone. Discover DHL110 Test the Lifter by turning your headset on and off to see if your phone properly picks up and hangs up. NOTE: Each phone is designed differently so the placement of your Handset Lifter varies. Keep adjusting until the phone will engage and disengage your phone calls, then firmly press the Lifter down to ensure the double sided tape sticks as long as possible. Discover DHL110

Other helpful resources:

  1. Yealink EHS36 setup with Discover Adapt 30 Wireless Headset
Category_setup guidesDhl110Discover dhl110Discover handset lifterDiscover lifterHandset lifterHeadset lifterLifterTelephone lifterWireless headset lifter

Leave a comment

All comments are moderated before being published