Plantronics CS55 Wireless Headset Setup With HL10 Handset Lifter | Headset Advisor

Step 1

Plug in the AC power and let your CS55 headset charge for about 3 hours for a full charge. *After setup if you get a triple beep tone, follow the CS55 pairing guide. plug in ac power

Step 2

Plug in your phone cord that came included with the CS55 to the back of your Plantronics charging base. plug cs55 phone cord in

Step 3

Unplug your desk phone handset from the base of your phone and plug it into the front of your Plantronics CS55 charging base. handset plug in

Step 4

Plug the other end of your Plantronics phone cord into the HANDSET port of your desk phone. rj9 phone cord

Step 5- Setup your HL10 Handset Lifter

 *Video will reference a straight plug connector to a different model of headset. The HL10 Lifter you need for the CS55 will be a right angle plug, so the charging base sits flush on your desk.

Plug one end of the HL10 into your CS55 charging base.

plantronics hl10 setup 1

Remove the double sided tape

plantronics hl10

Stick the Handset Lifter on the base of your phone

Lightly stick your HL10 Lifter down incase it needs to be readjusted. plantronics hl10 Every phone is designed different and may require you to stick and re-stick the Lifter on your phone until the correct positioning. For additional setup instructions follow the Plantronics CS55 wireless headset setup resource center.
Category_setup guidesCs50 wireless headsetCs55 wireless headsetHl10Hl10 setupPlantronics cs50Plantronics cs50 headsetPlantronics cs50 wireless headsetPlantronics cs55Plantronics cs55 wireless headsetPlantronics hl10Plantronics hl10 setup

Leave a comment

All comments are moderated before being published

Most Popular Office Headsets: