Do you want the best headset? 
For those of you who are using the Discover Adapt 30 wireless headset, you might have a need to know how to pair the headset top to the charging base.
This may be of interest as part of your initial headset setup, or it could be because the headset isn’t turning on. In either case, this blog will help you to get your wireless headset top paired back up to the base.
Before I break down the process for pairing the Adapt 30, I did want to let you know that I recorded a Youtube video on this exact subject.
So, if you’re like me, and a lot of other people, who prefer to watch video content over having to read it, then make sure to check out my video. In it, you’ll see the Adapt 30, and I’ll walk you through each of the necessary steps to get your headset reconnected to the base.
Adapt 30 Pairing Video
Step 1
Disconnect the AC power from the Adapt 30 charging base
Step 2
Remove the headset top from the charging base
Step 3
Wait 10 seconds
Step 4
Put the wireless headset top back into the charging base
Step 5
Press, and hold the mute button until you see a blue flashing light on the wireless headset top. Once you see this flashing LED, release the mute button.
Step 6
Reconnect the AC power to the headset charging base. At this time, you should see icons on the front of the charging base light up, and some may blink. This confirms that the headset is going into the pairing mode.
Step 7
Wait until you see the blue light on the headset top start to flash. Once you see this, it says that your headset top is now paired to the base.
Step 8
Remove the headset from the charging base. You should see a green LED light on the base turn on. This confirms that the headset is working.
Further Support
If you go through this process, and your headset still isn’t working, feel free to contact us, and one of our helpful support Reps will be more than happy to assist you.
Discover Adapt 30 Review Video
For those who would like to know more about the Discover Adapt 30, you might find this video overview very helpful. In it, Drew provides you with an overview as well as a microphone test so you can hear for yourself how this headset sounds.
